Olympus-OM
[Top] [All Lists]

RE: [OM] Om2/shoe2 and T32 flash cut-off

Subject: RE: [OM] Om2/shoe2 and T32 flash cut-off
From: "R. Wastell" <rrw@xxxxxxxxxxxxx>
Date: Tue, 27 Jan 1998 06:28:57 -0900
My recollection is that both Shoe 3 and 4 have three contacts for the flash 
foot (same pattern as OM-4 before the F-280) and on the bottom, two pins plus 
the main coaxial fixing screw.

I don't have a Shoe 3 to refer to but the local Olympus dealer had several the 
last time I went to look for a Shoe 4. I had to sort through the parts bin 
checking the bottoms to find the right one. Of course, the one Shoe 4 was 
cracked.

Bob

----------
From:   Bjxrnar Rxnningen[SMTP:etobjr@xxxxxxxxxxxxxxx]
Sent:   Monday, January 26, 1998 10:53 PM
To:     olympus@xxxxxxxxxxxxxxx
Subject:        Re: [OM] Om2/shoe2  and T32 flash cut-off

By the way, how many pins has the shoe 3?
My shoe 2 has 1 in center of the fixing screw and 1 behind it.
R. Wastell wrote:

> The Shoe 3 is for OM-2 and Shoe 4 is for OM-2N and OM-1N. Both provide
> TTL Auto Flash capability (not with OM-1N of course). The difference
> is in the position of the contact pins that go down into the top of
> the prism housing. On the Shoe 4 they are side by side and on the Shoe
> 3 fore and aft. I believe the Shoe 2 was for the 310 on the OM-2.
>
> Bob
>
> ----------
> From:   John Petrush[SMTP:jpetrush@xxxxxxxxx]
> Sent:   Monday, January 26, 1998 4:37 PM
> To:     olympus@xxxxxxxxxxxxxxx
> Subject:        Re: [OM] Om2/shoe2  and T32 flash cut-off
>
> Ummm......I believe the type 3 shoe is for the 310 flash.  The
> T-series use
> the type 4.
>
> John P
>
> -----Original Message-----
> From: Frank van Lindert <lindertv@xxxxxxx>
> To: olympus@xxxxxxxxxxxxxxx <olympus@xxxxxxxxxxxxxxx>
> Date: Monday, January 26, 1998 5:54 AM
> Subject: Re: [OM] Om2/shoe2 and T32 flash cut-off
>
> >On Mon, 26 Jan 1998 09:29:48 +0100, "Bj\xrnar R\xnningen"
> ><etobjr@xxxxxxxxxxxxxxx> wrote:
> >
> >>I have a OM-2 with hotshoe 2 and a T32-flash.  Can I modify my
> hotshoe
> >>to make my camera cut off the flash when there is enough light on
> the
> >>film? If I use my Power Bounce Grip 2 with 5-wire cable and type 3
> >>connector, the camera cuts the flash correctly.
> >
> >It is almost impossible to modify this shoe-2 yourself but,
> >fortunately, Olympus made the modification for you.
> >Buy a hotshoe type 3....
> >
> >Frank.
> >
> >
> >* Frank van Lindert|Royal Netherlands Meteorological Institute KNMI *
>
> >* Utrecht          |POB 201  =  NL-3730 AE  De Bilt  =  Netherlands *
>
> >* The Netherlands  |phone +31 30 220 64 54  =  fax +31 30 221 13 71 *
>
> >*                  |home: +31 30 252 22 55  =   lindertv@xxxxxxx    *
>
> ##################################################################
> # This message was delivered via the Olympus Mailing List
> # To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
>
> #   with subscribe olympus-digest in the message body.
> #
> # To unsubscribe from the current list send a message to
> # listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message
> body.
> #
> # For questions email: owner-olympus@xxxxxxxxxxxxxxx
> ##################################################################




##################################################################
# This message was delivered via the Olympus Mailing List
# To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
#   with subscribe olympus-digest in the message body.
#
# To unsubscribe from the current list send a message to
# listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
#
# For questions email: owner-olympus@xxxxxxxxxxxxxxx
##################################################################





##################################################################
# This message was delivered via the Olympus Mailing List
# To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
#   with subscribe olympus-digest in the message body.
#
# To unsubscribe from the current list send a message to
# listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
#
# For questions email: owner-olympus@xxxxxxxxxxxxxxx
##################################################################


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz