There are no parts on the main circuit that can be replaced individually. The 2
ICs used are of the metal can type (with a dozen lens or so)., and some of the
legs go through the main board and are soldered to a secondary board underneath.
Usually cleaning and adjusting certain levers will relieve the problems.
Certain
service centers have circuits but would usually charge $60 just for the part.
John
Camtech
Jim Terazawa wrote:
> I had this same problem with the -2N. I had it repared at authorized reparer.
> I believe that they had to replace one of the IC components. I think the
> quote of about US60 dollars is reasonable.
>
> Regards,
> Jim Terazawa
> >
> > Hi all
> >
> > I have a problem with mirror lockup on the OM2n, it happens about 1 in 5
> > times in both auto and manual modes.
> > I can release the mirror by moving the switch to ..check/reset or by
> > ...pressing the b-lock button and moving the shutter speed ring to B.
> > All shutter speeds seem to work fine..and when set to ..B.. the mirror
> > returns every time.
> > I have a repair quote of 40 Irish pounds...about 60 dollars but I would
> > like to have a go myself...can anyone HELP !!!!!!
> >
> > Rgds.... Paul Haigney...Dublin.. IRELAND
> >
>
> ##################################################################
> # This message was delivered via the Olympus Mailing List
> # To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
> # with subscribe olympus-digest in the message body.
> #
> # To unsubscribe from the current list send a message to
> # listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
> #
> # For questions email: owner-olympus@xxxxxxxxxxxxxxx
> ##################################################################
##################################################################
# This message was delivered via the Olympus Mailing List
# To receive the Olympus Digest send mail to: listserv@xxxxxxxxxxxxxxx
# with subscribe olympus-digest in the message body.
#
# To unsubscribe from the current list send a message to
# listserv@xxxxxxxxxxxxxxx with unsubscribe olympus in the message body.
#
# For questions email: owner-olympus@xxxxxxxxxxxxxxx
##################################################################
|