Olympus-OM
[Top] [All Lists]

RE: [OM] Macro coupling rings and T32 flashes

Subject: RE: [OM] Macro coupling rings and T32 flashes
From: "R. Wastell" <rrw@xxxxxxxxxxxxx>
Date: Wed, 25 Feb 1998 18:14:18 -0900
        The M.Grip cord connects the button switch on the bounce grip to the 
release jack on the winder. It is a short cord with a right angle plug on one 
end and a straight plug on the other. I ordered a new one recently through my 
local dealer; I think it was around $15.00. Or you could get the parts at Radio 
Shack and solder one up for less than $5.00.

        Bob


----------
From:   Chung, Stephen (D&B Telecom)[SMTP:ChungS@xxxxxxxxxxxx]
Sent:   Wednesday, February 25, 1998 2:54 PM
To:     'olympus@xxxxxxxxxxxxxxx'
Subject:        RE: [OM] Macro coupling rings and T32 flashes

Hi Garth,

you wrote:-
>>The latest acquisition is a T32 w/Power Bounce Grip 2, 0.6 meter TTL cord,
>>flash zoom adapter, M.Grip cord, AC adapter for the T32 and a spare (brand
>>new!) calculator panel for the T32.  Oh yes, and the nice fella threw in a
>>leatherette Oly case that accepts an OM camera with a Winder 2 attached


Can you describe the T32 zoom adaptor (what does it look like, zoom
range, etc) I recently enquired about that accessory here in Australia
and found it cost $80US new ouch!

I also recently bought a power bounce grip 2 for my T32 and immediately
found that with one hand on the grip and the other hand focussing the
lens, I didn't have any hands left to fire the shutter!  I noticed the
socket and trigger button for the M. grip cord on the bounce grip handle
and I was wondering if it was possible to connect this to the socket on
a Winder 1or 2 to trigger the shutter.  

One final thing using the bounce grip 2 on a winder equipped OM body
brings the flash slightly closer to the lens, I wonder if this could
lead to red eye problems when using the zoom adaptor.

Regards
S.C.
>
>
>

############################################################
| This message was delivered via the Olympus Mailing List
| To receive the Digest version mailto:listserv@xxxxxxxxxxxxxxx
|    with "subscribe olympus-digest" in the message body.
| To unsubscribe from the current list mailto:listserv@xxxxxxxxxxxxxxx
|    with "unsubscribe olympus" in the body.
| For questions mailto:owner-olympus@xxxxxxxxxxxxxxx
| Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html
############################################################





############################################################
| This message was delivered via the Olympus Mailing List
| To receive the Digest version mailto:listserv@xxxxxxxxxxxxxxx
|    with "subscribe olympus-digest" in the message body.
| To unsubscribe from the current list mailto:listserv@xxxxxxxxxxxxxxx
|    with "unsubscribe olympus" in the body.
| For questions mailto:owner-olympus@xxxxxxxxxxxxxxx
| Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html
############################################################


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz