Lee,
The only discrepancy I see between below table and the table printed by Olympus
(litho July 1996) is the 18/3.5. In the Zuiko Lens Group Spec table the 18/3.5
lens hood is specified as 49mm screw-in. The adapter ring 49mm --> 72mm could
be used for both the hood and for the lens filter.
Also, according the the same table by Olympus, the 35-80/f2.8 lens hood is
specified
as 'two nailed byonet' hood - sorry for the poor translation here. From the
advertisement photo of the 35-80/f2.8 zoom the hood looks like flower-shaped
one. Can't tell whether it is metal.
Regards,
Jim Terazawa
>
>
> Hi all:
> Here's an updated copy of the lens hood cross ref, based on the input of
> some folks. If anyone else out there could help fill in the blanks,
> especially by letting me know which hoods I have listed as metal also
> came in a rubber version, and vice versa, I'd appreciate it.
>
> Cheers,
> --Lee
>
> Below is a listing of which OM lens hood is intended for which Zuiko
> lens:
>
> Lens (f.l./f number) Lens Hood (1)(4) Notes
> 8/2.8 None, due to 180 deg FOV
> 16/3.5 None, due to 180 deg FOV
>*18/3.5 49mm --> 72mm step up ring metal
> 21/2.0 55mm screw in/57mm slide on
> 21/3.5 49mm screw in/51mm slide on (2)
> 24/2.0 55mm screw in
> 24/2.8 49mm screw in
> 24/3.5 Shift Built in
> 28/2.0 49mm screw in
> 28/2.8 49mm screw in rubber (7)(9)
> 28/3.5 49mm screw in metal (7)(9)
> 35/2.0 55mm screw in metal
> 35/2.8 51mm slide on metal/rubber (3)
> 35/2.8 Shift 49mm screw in/51mm slide on (2)
> 40/2 49mm screw in metal/rubber (6)
> 50/1.2 51mm slide on metal/rubber (3)
> 50/1.4 51mm slide on metal/rubber (3)
> 50/1.8 51mm slide on metal/rubber (3)
> 50/2 Macro Built in
> 50/3.5 Macro Built in
> 55/1.2 55mm slide on
> 85/2 49mm screw in metal/rubber (6)
> 90/2 57mm slide on rubber (5)
> 100/2 Built in
> 100/2.8 49mm screw in metal/rubber (6)
>
> 28-48/4 55mm screw in rubber (8)
> 35-70/3.5-4.5 51mm slide on metal/rubber (3)
> 35-70/3.6 60mm slide on rubber
> 35-70/4 57mm slide on rubber
> 35-70/4 Power Focus Unknown
> 35-80/2.8 Unknown
> 35-105/3.5-4.5 60mm slide on rubber
>
> 80/4 Macro None
> 135/4.5 Macro 57mm slide on rubber (5)
>
> All other lenses have built-in lens hoods.
>
> (1) Where two different hoods are listed for the same lens, the second
> hood type is from the 1985 edition of "The OM System Lens Handbook",
> while the first hood type is from a 1980 edition of the OM Lens Group
> Manual.
> (2) Both these lenses use the same hood.
> (3) These five lenses all use the same hood.
> (4) Note that originally many hoods were metal, but all current hoods
> seem to be rubber.
> (5) Both these lenses use the same hood.
> (6) These three lenses use the same hood.
> (7) The hoods for these two lenses are interchangable.
> (8) The hoods for the 28/2.8 or 28/3.5 can also be used on this lens.
> (9) The hood for the 28-48/4 can also be used on these lenses
>
>
> Finally, thanks to the following folks who helped compile this list:
>
> PCA Cala <PCACala@xxxxxxx>
> Frank van Lindert <lindertv@xxxxxxx>
> Mikael von Numers <mnumers@xxxxxx>
> "John A. Prosper" <prosper@xxxxxxxxxxxxxxxxx>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|