>From all the batteries I've tested, I've found that ALL alkaline 625A & U
>batteries
are 1.5 or 1.55 volts, which atleast cause a 2-3 stop error in the OM-1, 1N
meter
position, resulting in underexposure.
John
Bradley Mabb wrote:
> Hello Richard,
>
> Congrats on your fine new camera. You can call Olympus at
> 1-(800)-622-6372 and order a new manual (mine was n/c). As far as
> batteries, well- that's a long story. It's SUPPOSED to take a mercury
> battery (px625), but they've been outlawed in many states. You CAN use
> an alkaline 625 battery, but BE SURE it's a 1.3 volt, NOT a 1.5. The
> problem with these batteries are they will die off slowly, giving you
> a less accurate reading as it does. Another choice is the Zinc-air 625
> battery which acts more like a mercury (dies off suddenly). The downfall
> here is that they're harder to find, cost more, and last only about 4
> months. The ultimate problem solver is available through John H. (is it
> not? ;)) . It's a device that will accept 367 silver oxide battery (1.5
> v)
> with a diode to bring it down to proper voltage. This insert costs
> roughly
> $30.00, but the best choice in the long run.
>
> enjoy,
> Brad
>
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|