Olympus-OM
[Top] [All Lists]

Re: [OM]Making a remote cord for Winder 2

Subject: Re: [OM]Making a remote cord for Winder 2
From: "David Brown" <keswick@xxxxxxxxxxx>
Date: Mon, 14 Sep 1998 20:54:36 +0100
Careful Frank - these non-jack MD-1s could become collectors items!

David

----------
> From: Frank van Lindert <lindertv@xxxxxxx>
> To: olympus@xxxxxxxxxxxxxxx
> Subject: Re: [OM]Making a remote cord for Winder 2
> Date: 14 September 1998 20:26
> 
> On Mon, 14 Sep 1998 12:54:06 EDT, Pauls0627@xxxxxxx wrote:
> 
> >In a message dated 9/14/98 12:13:20 PM Eastern Daylight Time,
jans@xxxxxxxxxxx
> >writes:
> >
> ><< Hi Joel! It is trivial to make a remote cord for either the Winder 1
or 2.
> > (I wish it were so easy for the full motor drive...) It is simply a
short
> > circuit between the two contacts of a standard sub-mini phone jack. >>
> >
> >I thought the motor drive could accept the same remote accessories as
the
> >winder. For example, doesn't it work with the same M grip cord as the
winders
> >do? I realize it also has the additional connector for supplying power
as well
> >as controlling the drive (via the M AC Control Box, etc.), but I thought
it
> >also had the 2.5mm mini plug.
> >
> >Paul Schings
> >Coventry, RI
> 
> You are absolutely right, Paul, with one exception: the very early
> MD-1s do not have the jack. Later MD1-s (almost all of them) and all
> MD-2's do.
> 
> Frank van Lindert
> Utrecht NL.
> 
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz