TAKO. INTERNET SEIT 1996.
Olympus-OM

Re: [OM] OM4 Memorisation of exposure

Subject: Re: [OM] OM4 Memorisation of exposure
From: Alain Duquet <alain.duquet@xxxxxxxxxxxxxx>
Date: Fri, 18 Sep 1998 14:41:23 -0400
Conclusion?
I have a problem with the memory function because the bargraph continue to run.
Do you know what kind of problem I have?
The indications about memorisation of exposure (in the viewer end the red light
on top) are functionnals
when the memory level is pushed.
All others functions (spot, clear, shadow and hilight) too.
I dont have problem with battery drain.

Alain Duquet

Pauls0627@xxxxxxx a écrit:

> In a message dated 9/18/98 12:09:08 PM Eastern Daylight Time,
> alain.duquet@xxxxxxxxxxxxxx writes:
>
> << Do you know if the led indicating the exposure time is suppose to stop
>  and indicate the measure in the memory at the moment you push
>  the memory button on the OM-4 in auto mode,
>  or if it must continu to move with the condition of lighting? >>
>
> The "bar graph" should always indicate the actual exposure, so when you push
> the memory lever the bar graph should become fixed. I believe the only thing
> that would cause the bar graph to move at that point would be changing the
> exposure compensation dial (or clearing the memory, of course). When you use
> the memory feature, don't forget that you are *not* doing OTF metering
> anymore.
>
> Paul Schings
> Coventry, RI
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>