Olympus-OM
[Top] [All Lists]

Re: [OM] Bounce grip 2 meltdown

Subject: Re: [OM] Bounce grip 2 meltdown
From: "Shawn Wright" <swright@xxxxxxxxxxxxxxx>
Date: Sun, 4 Oct 1998 20:47:43 -0700
On 4 Oct 98, at 22:26, PCACala@xxxxxxx wrote:

> Hi Gareth:
> 
> > I was using my bounce grip 2 and T32 tonight in the bar, when, after
> >  one particular shot, there was an audible crack followed by a nasty
> >  smell and the bounce grip getting warm in my hand.
> 
> I'd suspect the T-32, esp. regarding the condition of the capacitor.  A short
> in the T-32 could cause the Bounce Grip 2 's batteries to overheat.  Best way
> to test that theory is to use a different flash in the Bounce Grip and see if
> it gets hot.
> 
Sounds a lot like the QA310 w/bounce grip 1 I have, except that the flash will 
heat up and "pop" all on its own now. I can use my other QA310 on the grip 
just fine, and have done so for over a year since the first problem cropped up. 
Opening the flash showed visible bulging of the large cap, so you may want 
to inspect your T-32...


Shawn & Janis Wright
swright@xxxxxxxxx
http://Zuiko.sls.bc.ca/~swright
(Olympus List Archives)

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz