Olympus-OM
[Top] [All Lists]

Re: [OM] OM-3T brassing

Subject: Re: [OM] OM-3T brassing
From: GMcGrath@xxxxxxx
Date: Wed, 18 Nov 1998 07:22:18 EST
Denton@xxxxxxxx writes:
<< Please, not a match! A heat gun is the proper thing to use; lacking one a
 hair dryer will probably do the trick. >>
Thanks for the caution, Denton. I have found that my hair dryer, at least
(1600w model), doesn't get the tubing hot enough for good shrinking. A heat
gun is not in my current arsenal. One must always be careful with flames,
especially near a dear OM camera. :-)
Greg

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz