Olympus-OM
[Top] [All Lists]

Re: Re:Film Labs (was [OM] metering/Latitude)

Subject: Re: Re:Film Labs (was [OM] metering/Latitude)
From: "John Petrush" <petrush@xxxxxxxxxxxxx>
Date: Thu, 26 Nov 1998 12:14:52 -0800
I have had this happen several times, for differing reasons - can't handle
the size (120 or 4x5), the film type (Kodachrome!), the film canister (250
magazine).  Frustrating, isn't it??!!?  I once read that 850f all the film
shot world-wide is 35mm color negative, process C-41, in P&S cameras.  It is
no surprise as processing becomes more market focused and totally
"hands-free" automated, that unless your film type and processing needs fit
the norm, you are out of luck.  Your choices get reduced to paying a premium
for non-standard processing (and long delays) or doing it yourself.

As Shawn has already mentioned, processing film at home is easy and cheap,
especially B&W.  You can push or pull the development, control contrast by
changing the agitation method, whatever you need.  You can even make B&W
contact sheets fairly easily in a bathroom setup.  Much more and life gets
complicated without a real darkroom, but you'd be surprised. :)

For color, the only trick is the temperature control.  A cheap styrofoam
cooler, a few cement bricks and an aquarium heater solve that problem rather
neatly.  It just takes a little planning to heat the water bath a day or so
ahead of time.  The cement bricks help keep the temperature steady since
they are _much_ slower to give up heat than water.  They smooth out the
variations of dipping the tank and bottles in and out of the bath.  Works
just fine for C-41 or E-6.

 John P
______________________________________
there is no "never" - just long periods of "not yet".
there is no "always" - just long periods of "so far"

BILL F BROOKS <brookswf@xxxxxxxx> lamented:


>Has anyone ever had film sent back to them undeveloped because the lab
>*couldn't* develop it?  I just had a roll of Tri-X that I wanted pushed
>to 1600 ISO returned with a nice little note saying they couldn't push
>process it.  They have pushed film for me in the past, but perhaps are
>now totally automated and use the DX coding exclusively...I guess it's
>time to find another lab...




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz