Olympus-OM
[Top] [All Lists]

Re: [OM] OM-10 Winder 1 Compatibility

Subject: Re: [OM] OM-10 Winder 1 Compatibility
From: John Hermanson <omtech@xxxxxxxxx>
Date: Thu, 25 Mar 1999 12:12:38 -0500
If your 10 is not working with a Winder 1 or 2 (NOT Motor Drive 1 or 2),
then it is most likely the MD switch in the bottom of the camera is
either dirty or out of adjustment.  The switch does not need
modification to work with a winder.

John

Kinkead, Frank W wrote:
> 
> I have two OM-10s; one works fine with my Winder 1 and one (a newer OM-10
> Quartz) does not.  I recall seeing something on a FAQ about a making a small
> electrical wiring modification under the baseplate of OM-10s that might fix
> same.  I can't recal where I saw this.  Has anyone else ran across this
> reference ?  Has anybody tried to accomplish the mod ?
> 
> Chip
> (St. Louis, MO  USA)
> 
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz