Olympus-OM
[Top] [All Lists]

[OM] OM-10Q MD Adjustement/Repair

Subject: [OM] OM-10Q MD Adjustement/Repair
From: "Kinkead, Frank W" <Frank.Kinkead@xxxxxxxxxxxxx>
Date: Sun, 25 Apr 1999 14:45:42 -0500
Problem: My OM-10Q is not functioning on Winder 1 or Winder 2:

John Hermanson Recently Responded - "If your 10 is not working with a Winder
1 or 2 (NOT Motor Drive 1 or 2), then it is most likely the MD switch in the
bottom of the camera is either dirty or out of adjustment.  The switch does
not need modification to work with a winder."

Has anyone had a similar problem and accomplished any "at home" diagnostics
or adjustments to the MD switch ?  I've taken off the plate but I don't see
any obvious cleaning to do.

Thanks,

Chip
St. Louis, MO  USA

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz