Olympus-OM
[Top] [All Lists]

[OM] Re: olympus-digest V2 #902

Subject: [OM] Re: olympus-digest V2 #902
From: "Tom Trottier" <infoanim@xxxxxx>
Date: Sun, 9 May 1999 18:24:09 -0400
However, you can use visual inspection to determine the comparative 
sensitivities to vibration of the tripod/head setup, use of a bean bag 
or support, etc.
Tom

> Date: Sat, 8 May 1999 14:29:03 EDT
> From: WKato@xxxxxxx
> Subject: Re: [OM] Shutter Shudders Scutiny
> 
> In a message dated 99-05-08 07:05:36 EDT, you write:
> >  It's not really necessary to attach the laser pointer to the camera or
> >  lens, all you really need is a small mirror attached (maybe with double
> >  sided tape) then the laser pointer can be aimed at that.
> 
> Let me try to expand on this. You never know if the motion you see with
> the laser light occurs before, during or after the exposure. So attach the
> mirror to the body, aim the laser pointer so that it the dot is in the
> field of view of the camera lens and take a photo. This will eliminate any
> vibrations that occur after the shutter closes and the mirror falls back
> down (an undamped motion).
> 
> Warren
------------------
From: Tom Trottier, President, ACT Productions Inc.
infoanim@xxxxxx                   http://www.act.ca
+1 613 594-4829                 fax +1 613 594-8944
199 Holmwood Ave,  Ottawa, Ontario, Canada  K1S 2P3
"Make it as simple as possible, but no simpler" - Einstein

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
  • [OM] Re: olympus-digest V2 #902, Tom Trottier <=
Sponsored by Tako
Impressum | Datenschutz