Olympus-OM
[Top] [All Lists]

RE: [OM] The Kindest Cut

Subject: RE: [OM] The Kindest Cut
From: "Brian P. Huber" <bphuber@xxxxxxxxxx>
Date: Fri, 4 Jun 1999 22:41:25 -0400
Fish filleting knives work well for this too.  And they're relatively cheap
and easy to find.
Brian P. Huber
bphuber@xxxxxxxxxx
Troy, OH


-----Original Message-----
From:   owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of kelton
Sent:   Friday, June 04, 1999 12:13 AM
To:     Olympus List
Subject:        [OM] The Kindest Cut

> big chunks of good quality black foam . . .
>To cut use electric turkey carving knife, bandsaw, utility knife, tablesaw.
>All work but the some (bandsaw) make prettier work.

Thanks for the "dumpster" tip re where to find black foam; I'll check the
local computer store. The following recommendations are (obviously) for
OM gear only, making them kosher for posting: I've cut a lot of
(expensive store-bought) black foam, and have learned that it's best cut
with a smooth (knife-edge) jigsaw blade. (I suppose they make a
knife-edge bandsaw (butcher's?) blade, too, but have not tried this.) The
knife-edge jigsaw blade is a specialty blade for which you may have to
hunt around, or order online, but the results are well worth it. Dear
listreader, please remember to cut each hole a bit smaller than the O.D.
of the Zuiko or OM body it holds. (I aim for about an 1/8 inch smaller
all around, depending on size of the object). I've had real bad luck with
cutting foam on tablesaws.

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz