Olympus-OM
[Top] [All Lists]

Re: [OM] Minor repair needed - 100 / 2.8 Zuiko

Subject: Re: [OM] Minor repair needed - 100 / 2.8 Zuiko
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 16 Jun 1999 10:42:32 -0400
What net site for OM repair.  If so, they are, well, just wrong.

John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121
http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: Terry Mair <tmair@xxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, June 15, 1999 11:22 PM
Subject: Re: [OM] Minor repair needed - 100 / 2.8 Zuiko


> I stand corrected, but that is what they recomend on the net site for OM
repair!!
> terry
>
> John Hermanson wrote:
>
> > The factory uses rubber cement, NEVER cyanacrolate which is crazy glue,
> > sometimes known as super glue.  I recently did a 4 where the owner had
> > dribbled cyanacrolate into the eyepiece lens.  A big F*****g mess.
> >
> > John
> > ----------------------------------------------------------------
> > Camtech / Olympus Service since 1977
> > 21 South La., Huntington NY 11743-4714
> > 516-424-2121
> > http://www.zuiko.com
> > --------------------------------------------------------------
> > ----- Original Message -----
> > From: Terry Mair <tmair@xxxxxxxxxxxxxx>
> > To: <olympus@xxxxxxxxxxxxxxx>
> > Sent: Tuesday, June 15, 1999 4:42 PM
> > Subject: Re: [OM] Minor repair needed - 100 / 2.8 Zuiko
> >
> > > Hot glue that works for every thing!!!!
> > > I think the factory uses cyanoacrylate glue what ever the heck that
is!!
> > > Terry
> > >
> > > John Hudson wrote:
> > >
> > > > The rubber finger grip ring on my 100/2.8 has become loose and slips
> > > > forwards and backwards on the lens barrel. The ring is still fairly
taut
> > and
> > > > I would like to stick it back into place before it becomes stretched
and
> > > > slack.
> > > >
> > > > Is there any advice as to what kind of adhesive I should use so as
not
> > to
> > > > damage the lens barrel while at the same time ensuring that the ring
> > does
> > > > not come loose again?
> > > >
> > > > Thanks
> > > >
> > > > John Hudson
> > > >
> > > > < This message was delivered via the Olympus Mailing List >
> > > > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > > > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> > >
> > >
> > > < This message was delivered via the Olympus Mailing List >
> > > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> > >
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz