Olympus-OM
[Top] [All Lists]

Re: [OM] OM-2 battery short

Subject: Re: [OM] OM-2 battery short
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Tue, 6 Jul 1999 09:35:32 -0400
Sounds like the main switch is shorted.

John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121
http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: Tom Curlee <t_curlee@xxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, July 05, 1999 7:51 PM
Subject: [OM] OM-2 battery short


> I recently picked up a clean OM-2 body super cheap.  It was sold 'as-is',
> i.e. wouldn't work.  Of course there weren't any batteries in it so I was
> hopeful.  I put in new batteries and it worked perfectly, but then
wouldn't
> work at all a few minutes later.  I pulled the batteries and found that
> there was a .25 Amp load on the battery! Later I found that the load
varies
> between 2.5 to 5 Ohms across the battery terminals when the shutter is
> cocked.
>
> I (don't listen, John H. :-)) pulled off the top and bottom covers and
> poked, prodded, pulled, moved, etc., etc. (about 3 hours worth of etcs.)
and
> found that the short goes from around 150 Ohms when shutter is released in
B
> to the 2.5 - 5 Ohms when shutter is cocked.  The heavy load starts when
the
> wind lever is just barely moved.
>
> The area causing the short appears to be to the right of the lens (when
> looking at the lens from the front).  From the bottom, pushing a vertical
> linkage (part of the cocking mechanism)forward will cause the short to go
> away (well, to about 1 MOhm), pushing the other way it goes to full load.
I
> suspect that I can get to the area causing the short if I can remove the
> lens mount assembly, shutter ring and all.
>
> The question is, can I peel back the leatherette covering, remove the 4
> mounting screws, and rotate the whole lens mount/shutter ring assembly up
> and out (still connected) without disconnecting the shutter string and
> wiring?
>
> Any suggestions or info??
>
> Thanks, Tom
>
>
>
>
>
> _______________________________________________________________
> Get Free Email and Do More On The Web. Visit http://www.msn.com
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz