Olympus-OM
[Top] [All Lists]

Re: [OM] M-Quartz remote controller 1

Subject: Re: [OM] M-Quartz remote controller 1
From: Steve Nicholls <gl1500@xxxxxxxxxxxxxx>
Date: Sat, 21 Aug 1999 17:54:06 +0930
I made one exactly like you are describing and used a 35mm plastic film 
cannister
for the handle. Worked a treat, it is still around somewhere.
Steve Nicholls [Adelaide, Australia]

Neil Izzard wrote:

>     Hey Wayne, I just priced one from R Gunz & Co. Olympus agents here in
> Melb.
> Are you sitting down? New they are something like Aud. $400.00 - 450.00 !
> Sorry for the bad news. But a simple fix if it suits your purpose, is make up
> a simple cable remote for your Motor Drive/Winder.
> You will require a 2.5mm Mono Jack, this plugs into the socket on the drive. A
> suitable length of  two core cable (round is better than figure 8, easier to
> roll) and a single pole, momentary on, normally open switch.
>     Fit the switch into a suitable handle, I  used an old AAA mini light torch
> body, but anything around that size will do, a bit of soldering and you have
> your remote for about $ 10.00
>
> "Harridge, Wayne" wrote:
>
> > Dear Zuiks,
> >
> > Does anyone know what the above mentioned device is worth ?  I have a
> > possible chance to purchase one from a private buyer and am wondering what
> > to offer.
> >
> > Wayne Harridge
> > Ivanhoe, Victoria, Australia
> > http://www.geocities.com/Paris/Louvre/6152/
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz