Olympus-OM
[Top] [All Lists]

Re: [OM] OM-2 Light Meter

Subject: Re: [OM] OM-2 Light Meter
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Thu, 16 Sep 1999 09:32:58 -0400
Or, the manual circuit board behind the coupling rings is dirty.  This is a
thin ceramic board with small resistors and sliding  brushes.  The brushes
are pulled in either direction by strings sttached to the ss  ring.

John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121     http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: <HI100@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, September 15, 1999 11:29 PM
Subject: Re: [OM] OM-2 Light Meter


> Jimmy,
>            your OM2 should work first time on whatever it is switched to.
> Sounds like a dirty or damaged mode selector switch. The match needle
meter
> circuit is not very complex containing only resistive components, so I
would
> strongly suspect the switch.
>
> Tim Hughes
> Hi100@xxxxxxx
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz