Yes, it's an alignment hole. Please exuse my ignorance....duh!
Thank you very much for the info.
jim
"Brian P. Huber" wrote:
> Jim,
> This may not be a screw hole. There is one blank hole in the camera base to
> allow for the alignment pin for the winder or motor drive. Remove the base
> plate and see if it is indeed a screw hole or alignment hole.
>
> Brian P. Huber
>
> Troy, OH
> bphuber@xxxxxxxxxx
>
> -----Original Message-----
> From: owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
> On Behalf Of Jim Mueller
> Sent: Saturday, November 13, 1999 8:19 AM
> To: olympus@xxxxxxxxxxxxxxx
> Subject: [OM] OM-1 Base Screws???
>
> I need a screw for my OM-1. There's a blank hole in the base of the
> camera. Does anyone know where I can purchase such a screw?
>
> Thanks
>
> jim mueller
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|