In the original 2, "off" speed (controlled by the off limiter) is asa
dependant. Low asa = longer "off position shutter speed with lens cap on"
versus high asa = faster "off position shutter speed......."
John
________________________________
Camtech, Olympus Service since 1977.
21 South La. Huntington NY 11743
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
--------------------------------------------------------------
----- Original Message -----
From: Dirk Wright <wright@xxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, December 02, 1999 3:54 AM
Subject: Re: [OM] Operating the OM2 when "Off"
> >To Olympus Lovers,
> > When checking the OM2 circuit diagrams a while ago, it occurred to
> me
> >that by changing the value of one resistor you could make the range of
> auto
> >timing values much more convenient for shots when you don't have time
> (or
> >forget) to switch the camera power switch on.
>
> my om2n only fires at one shutter speed when the switch is in the "off"
> position. is the om2 different?
>
> Be seeing you.
>
>
> Dirk Wright
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|