Dylan wrote:
> I only had the thing for a day, but I think you're
> wrong on that. While the panel does _mechanically_
> interface with the switch (pushing it to auto when
> the panel was reversed to show the "full automatic
> operation on OM2" side"), the switch mechanism is
> built into the body. While you need the panel to
> tell you what position the switch is in (left is
> auto IIRC), it should still work without the
>
Correct, you don't really need the panel as long as you know what position
to put the switch in and have a table for the info that is normally on the
panel.
Wayne Harridge
Ivanhoe, Victoria, Australia
http://www.geocities.com/Paris/Louvre/6152/
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|