Tim,
I don't think that you should make the assumption that the output of
an AC power supply to the TPower Control Unit is what it feeds to the
flash tubes. I believe that you would be several multiples off on the
voltage. I would think that the voltage to the flash tubes would be in
the vicinity of 1 or 2 thousand volts.
Rand E.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
HI100@xxxxxxx wrote:
>
> Electronics OM Ringflash Question :
>
> I am wanting to use the T10 with a different manufacturers power unit and
> need some information on TPower control unit (which I don't own)
>
> Most ring flashes use 500-550V rather than the more common 330v used for
> shoe flashes like the T20/T32. This is probably because of the long flash
> tube in the ring flashes. But the TPower Control works with the Bounce grip 2
> which provides 330V to the normal T series flashes so the implication is that
> the T10/TPower control uses the same 330V as the normal T20/T32 series
> flashes. Can anybody verify this for me?
>
> Thanks for any info.
>
> Tim Hughes
> Hi100@xxxxxxx
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|