Olympus-OM
[Top] [All Lists]

Re: [OM] fill flash question

Subject: Re: [OM] fill flash question
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Sat, 29 Jan 2000 22:26:28 -0500
Thats one of the reasons that multi TTL cords were never made for the 310,
high trigger coil voltages and higher amps = fried sync contacts.

John
________________________________
Camtech, Olympus Service since 1977.
21 South La.  Huntington NY 11743-4714
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
--------------------------------------------------------------
----- Original Message -----
From: *- DORIS FANG -* <sfsttj@xxxxxxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Saturday, January 29, 2000 6:14 PM
Subject: RE: [OM] fill flash question


>
>
> On Sat, 29 Jan 2000, Brian P. Huber wrote:
>
> > In regards to 283's damaging electronics, I think it has to do with the
year
> > of manufacture.
> > I believe there was in article about this in Pop Photo a while back.
Seems
> > like 283's and some others had very high trigger voltages.
> > Trigger voltages are now lots lower on recent units.
>
>   I think this is right, the 285 were all low voltage, but just to be
> safe...I'd use a bracket or flash block before chancing damaging an OM.
>
>                                   *= Doris Fang =*
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz