Tim Hughes States:
The Sunpak OT-1D adapter does not
* work the Sunpak shoe mount flashes to my knowledge. (Somebody else
confirm?).
The OT-1D DOES work with the Sunpak shoe mount units. The EXT10 is the
extension cord set that works with the OT-1D and shoe mount units. The
EXT11 works with handle mount units.
The OT-1D should work with all current Sunpak units.
If I'm correct, the RS unit is only for the older (522) series)
Brian P. Huber
Troy, OH
bphuber@xxxxxxxxxx
Tim,
The designator on the remote adapter OM sensor for the Sunpak potato
masher type flash is RS OT-1D and the designator for the shoe type
Sunpak flash is as you said OT-1D. The RS OT-1D is much larger, more
features, uses internal battery, and terminates at the end of a coiled
cord in a 4 or 5 pin plug.
Rand E.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~
HI100@xxxxxxx wrote:
>
> << Or rather, how can I connect my OM-2n with TTL
> connector 4 and cord to a vivitar, or sunpak and make it fire? >>
>
> If you use a Sunpack potato masher style flash then you need the Sunpak
cable
> and the Sunpak dedicated OM module (OT-1D). The module mounts on the
camera
> and connects via cable to the flash. There are a few different cables
> depending on the flash unit. You cannot use Olympus's own cable with
Sunpak
> or other independent flashes, these are all proprietary. The OT-1D was
> available from B&H for about $32 new (list 66). The EXT11 cable for Sunpak
> 555 and 622 sells for about $40 (70 list)
>
> Tim Hughes
> Hi100@xxxxxxx
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|