Olympus-OM
[Top] [All Lists]

Re: [OM] Framing your prints

Subject: Re: [OM] Framing your prints
From: "Giles" <cnocbui@xxxxxxxxx>
Date: Tue, 7 Mar 2000 11:31:57 +0000
I do not actually frame my prints but I do display some of the better ones 
at home.

I mount my prints on a board without a frame.  I use that plastic board 
that is used for real estate signs, election campaigns and such.  It is a 
bit like cardboard in construction having two flat faces separated by ribs 
giving it square channels between the flat panels.  It is very light and 
quite cheap.  It can even be free if you acquire  old signs which are no 
longer required.

It doesn't matter what is printed on it or what colour it is because the 
surface is not quite flat enough to use as-is so I cut a same sized piece 
of coloured cardboard, usually either black or white, I get from an art 
shop.  I stick the cardboard to the board with a spray-on adhesive though 
many glues would do.  I then mount the print in the centre of the card 
using a tissue-like double sided tape.  This is a bit of a fiddle and I 
would get a better result with mounting tissue but I have never come 
across any and am unlikely to where I live.

If you cut the board so the internal channels are horizontal you can hang 
the finished print by threading a cord through one of the channels at
the top , knot the ends together then pull the knot back inside the 
channel so it is hidden.

Now having mentioned what I 'do' I will mention what I intend to do when I 
have used up my current supply of materials.  When I was in the printers 
getting the board I noticed a display of samples of a  plastic board like 
material with a very nice finish available in numerous colours.  I think 
it must have been some sort of foamed plastic.  Anyway, it looked really 
slick and could be used to mount a print directly on without messing 
around with card.  I asked some questions but the proprietor was out so I 
could not get any firm details on cost etc but I think it would be more 
expensive than what I currently use but would give a nicer result with 
less messing around.

Giles

DaEyeGuy@xxxxxxx wrote:

> Do many of you frame up your prints and/or display them in a home gallery?? I 
> want to do this at home as well as..
> And, if you have been framing your shots, do you have a good reference for a 
> frame company? The locals here are outrageously high-retail.
 

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz