Pliobond and "Goo" (by Hobsco) are available in many well stocked hardware
stores or hobby stores. Coat both surfaces (after cleaning) allow to dry a
few minutes, then press together. Don't get glue in the back latch
mechanism.
John Hermanson
___________________________________
Camtech, Olympus Service since 1977.
21 South Ln. Huntington NY 11743-4714
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: Giles <cnocbui@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, April 03, 2000 2:41 PM
Subject: Re: [OM] One last question
>
> John Hermanson usually recommends plio bond I think. One generic term for
> this kind of glue is contact cement. I have also seen it called impact
> cement.
>
> You lightly coat both surfaces with glue, wait until they are both barely
> tacky and then position the piece and press it on. I would start at one
> edge and sort of roll it on to lessen the chance of trapped air bubbles.
>
> Giles
>
> Tom Scales wrote:
>
> > I'm tired, so this is definately my last question.
> >
> > I have a user 4T where the leather (vinyl?) on one side of the front has
> > completely come off. I have the piece, I am just curious as to how to
best
> > reattach it. Thoughts?
> >
> > Thanks
> >
> > Tom
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|