George, if you want the wind mech from my dead OM10, you're welcome to
it. The camera died from circuit failure, and has since been
irretrievably dismantled, but the winding mech is still complete.
Dylan
> Date: Thu, 6 Jul 2000 09:24:45 -0400
> From: "John Hermanson" <omtech@xxxxxxxxx>
> Subject: Re: [OM] OM-1n winding problem
>
> OM-G, 10, F and PC are a third type of wind mech., usually requiring
> replacement.
>
> John Hermanson
> ___________________________________
> Camtech, Olympus Service since 1977.
> 21 South Ln. Huntington NY 11743-4714
> 631-424-2121 http://www.zuiko.com
> Free Olympus Manuals: 1-800-221-3000
> ___________________________________
> - ----- Original Message -----
> From: <ClassicVW@xxxxxxx>
> To: <olympus@xxxxxxxxxxxxxxx>
> Sent: Wednesday, July 05, 2000 8:06 PM
> Subject: Re: [OM] OM-1n winding problem
>
>
> | omtech@xxxxxxxxx writes:
> |
> | > The 1 through 2N share the same wind mech., the 2S and up are completely
> | > different. The 1-2N can be rebuilt, the other must be replaced.
> | >
> | Well,
> | Since this thread started, my OM-G just started doing almost the same
> thing.
> | After taking a shot, it takes two strokes to cock the shutter- But the
> FIRST
> | stroke causes the shutter to fire again as you advance the wind lever. Is
> | there anything I can check such as a gear or a lever in the mechanism, or
> | does the entire wind mechaniasm need replacing? Thanks for any assistance
> |
> | George S.
> |
> | < This message was delivered via the Olympus Mailing List >
> | < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> | < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|