The wind mechs for these 4 cameras are similar in their roller clutch
design, but they are not interchangeable from camera to camera.
John Hermanson
___________________________________
Camtech, Olympus Service since 1977.
21 South Ln. Huntington NY 11743-4714
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: Dylan <dsut4392@xxxxxxxxxxxxxxxx>
To: olylist <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, July 10, 2000 12:00 AM
Subject: [OM] OM-G winding problem [was OM-1n winding problem]
| George, if you want the wind mech from my dead OM10, you're welcome to
| it. The camera died from circuit failure, and has since been
| irretrievably dismantled, but the winding mech is still complete.
| Dylan
|
| > Date: Thu, 6 Jul 2000 09:24:45 -0400
| > From: "John Hermanson" <omtech@xxxxxxxxx>
| > Subject: Re: [OM] OM-1n winding problem
| >
| > OM-G, 10, F and PC are a third type of wind mech., usually requiring
| > replacement.
| >
| > John Hermanson
| > ___________________________________
| > Camtech, Olympus Service since 1977.
| > 21 South Ln. Huntington NY 11743-4714
| > 631-424-2121 http://www.zuiko.com
| > Free Olympus Manuals: 1-800-221-3000
| > ___________________________________
| > - ----- Original Message -----
| > From: <ClassicVW@xxxxxxx>
| > To: <olympus@xxxxxxxxxxxxxxx>
| > Sent: Wednesday, July 05, 2000 8:06 PM
| > Subject: Re: [OM] OM-1n winding problem
| >
| >
| > | omtech@xxxxxxxxx writes:
| > |
| > | > The 1 through 2N share the same wind mech., the 2S and up are
completely
| > | > different. The 1-2N can be rebuilt, the other must be replaced.
| > | >
| > | Well,
| > | Since this thread started, my OM-G just started doing almost the same
| > thing.
| > | After taking a shot, it takes two strokes to cock the shutter- But the
| > FIRST
| > | stroke causes the shutter to fire again as you advance the wind lever.
Is
| > | there anything I can check such as a gear or a lever in the mechanism,
or
| > | does the entire wind mechaniasm need replacing? Thanks for any
assistance
| > |
| > | George S.
| > |
| > | < This message was delivered via the Olympus Mailing List >
| > | < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
| > | < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|
| < This message was delivered via the Olympus Mailing List >
| < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
| < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|