Gary,
my OM-4Ti works on Super FP mode, but I don't know if it's working properly
because I didn't take any picture only test it with out film on Super FP. I
only check it on simple pictures and everything looks ok.
>From the other I check the resistances on the pins using this note.
{
F8) What is the pinout of the T connector socket?
Looking into the camera connection (pins, ie. male part of connector)
* Ground (camera chassis)
> <
Flash Sync Contact * * Viewfinder ready light
No Connection * * Flash Quench
^
where * are the pins, and <>^ are the alignment keys.
Thanks to Kennedy <rkm@xxxxxxxxxxxxxxxxxx>
}
so I discover that the pin "Viewfinder ready light" is "short circuit" with
the ground and this is not normal. In my other OM4Ti the resistant for this
pin is difference.
Also I discover that this OM4Ti have been opened.
So I am going to give it for service - because I don't know how to opened
to check the cables inside.
Thank you all
Babis
----- Original Message -----
From: "gary edwards" <maitani@xxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, July 19, 2000 3:58 AM
Subject: Re: [OM] I have a problem with the F280 and an OM4Ti
> Babis,
>
> I'm not sure whether it has any relation to your problem, but one of my
> OM-4Ts will not fire the F280 in the Super FP mode. My other OM-4T will
> fire the F280 in that mode. Does yours work in that mode? I can't recall
> whether the light works.
>
> Gary Edwards
>
>
> >From: "Babis E. Mavridis" <mavridis@xxxxxxxxxxxxxxxxxxx>
> >Reply-To: olympus@xxxxxxxxxxxxxxx
> >To: <olympus@xxxxxxxxxxxxxxx>
> >Subject: [OM] I have a problem with the F280 and an OM4Ti
> >Date: Mon, 17 Jul 2000 12:06:45 +0300
> >
> >I buy a used OM4Ti as a second body, and when I tested with the F280 the
> >green light inside the OM4Ti is not working and OM4Ti did not understand
> >that the F280 is plugged and on.
> >So camera can still make spot metering and everything like the flash is
NOT
> >on.
> >I take some pictures with this OM and Flash and everything looks ok, the
> >flash is show that work with OM fine, except the signals inside the OM.
The
> >photos looks ok with light. The lights on the flash works (blind or not)
> >when I shoot the pictures. So the flash is show that take feedback from
the
> >camera.
> >
> >Did any one have any idea what can I do ? to fix it - or what may the
> >problem be ?,
> >
> >Thank you in advance for any help.
> >Babis
> >
> >P.S.
> >The same flash I tested with one other body and everything works fine.
> >
> >
> >
> >
> >< This message was delivered via the Olympus Mailing List >
> >< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> >< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> >
>
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|