I don't get any of the foam pre-cut. I cut it down from large sheets.
Using a fresh xacto 11 or single edge razor blade works well. I cut on a
rubber mat (with no grain to "lead" the blade around) and compress the foam
with a metal ruler as it is cut.
John Hermanson
___________________________________
Camtech, Olympus Service since 1977.
21 South Lane, Huntington NY 11743-4714
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: <DAVDOU9211@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, July 24, 2000 10:41 AM
Subject: Re: [OM] Foam replacement advice
| I too had the experience of trying to put the adhesive type of strips into
| the 2mm slots in my SP. After three tries I had a mess and NO LIGHT SEALS
| anywhere. John, can I get pre-cut seals for the SP from you?
|
| Dave Dougherty
|
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|