Sorry, if I'm a bit clueless on this point.
Paul Schings (ZuikoholicRI@xxxxxxx) wrote:
> The T32 has a TTL connection built in. If used on a TTL connector T20 or a
> BG2 you can use the extra connection to add another flash, potentially
> alleviating the need for the multi connector.
Do you have direct experience "daisy-chaining" the flashes? I had always
imagined that the TTL cord socket in the t32 could only be used for in
from the camera (or multi-connector), not linked out to another flash. No
idea how the schematics work, but I'd never seen a diagram by Oly with
your recommendation. Happy to test this out with some assurance that I
won't short anything...
Goodness, does this imply that I could use the socket on the BG2 as an
outlet to a downstream flash if I put the cable from the camera directly
to the T32 socket when the T32 is mounted on the BG2?
With one T32, a couple of BG2s (I"ll probably be selling one shortly), 2
T20's (one with the TTL connector), plus my recent purchase of some more
cables and a multi-connector, I'm suddenly overwhelmed by combinatorial
possibilities... Guess I'll need a polaroid back to figure out lighting
now!
Off-list contact welcome if this is less relevant than Corvettes... :-)
Eric Pederson
epederso@xxxxxxxxxxxxxxxxxxxx (no "n" in "epederso")
Professional home page:
http://logos.uoregon.edu/uoling/faculty/pederson/pederson.html
Personal home page:
http://darkwing.uoregon.edu/~epederso/
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|