Olympus-OM
[Top] [All Lists]

Re: [OM] Wanted: base for focus rail or bellows

Subject: Re: [OM] Wanted: base for focus rail or bellows
From: "Terry and Tracey" <foxcroft@xxxxxxxxxxxxxxxx>
Date: Sat, 23 Sep 2000 23:31:45 +1100
The tap you describe is a taper tap. There is also an intermediate (rare)
and a plug tap. The plug will tap to about 1mm (note the metric!) from the
bottom of the hole.

Foxy

----- Original Message -----
>I wouldn't advise anyone to do it this way with a good rail, but
>rather use the tap and die set needed to do such a thing properly.

I've considered that, but the hole is extremely short -- most taps
have a long tapered end that requires at least a cm or so of relief.
(At least mine do.)

I'm going to try your idea of carefully deepening the hole before tapping
it.





< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz