Olympus-OM
[Top] [All Lists]

Re: [OM] Adaptall 2 and OM2SP

Subject: Re: [OM] Adaptall 2 and OM2SP
From: B Gray <bandvg@xxxxxxxxxxxxxxxxx>
Date: Mon, 25 Sep 2000 21:37:21 +0100
Cc: "olympus@xxxxxxxxxxxxxxx" <olympus@xxxxxxxxxxxxxxx>
At 09:17 21/09/00 -0700 you, Mike, wrote:
>Adaptall2 lense mounts have an aperature coupling tab (that couples the
>lens aperature ring to the camera's aperature sensing lever or
>snip
....
OM body) slightly bent so it didn't mate properly with
>the camera's sensing lever...a slight "adjustment" to the mount and all
>was well there too. HTH and look forwards to seeing what kind of results
>you get from this lens.
>
        Many thanks for the comments on setting up a lens with an adaptall
2.  The e-mail was awaiting my return from a day or two away using the OM2SP
(but without a tripod and hence without the 500 lens).
        Your ideas fit my recollection of what I did ie move a 'lever' round
without the correct setting being obvious.  I have just taken in for
developing the film that has most of my test shots with the Tamron lens and
I am awaiting the results with interest.  However, I do not expect to reach
your standards as I am very much a learning amateur who finds moving objects
distinctly difficult to get appropriately in focus.  Especially if the
movement is relatively unpredictable like children and wildlife!
        No problems with movement yesterday as I accompanied my wife along a
geological trail - instead there was a torrential downpour which created its
own problems when changing lenses and using flash!
Brian Gray


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz