T -
There must be 100+ reasons why an OM-1 would jam - you'll need to
find a good OM tech to check it out. But it _should_ be repairable.
And gooey foam is common with every camera of this era - replacement
is routine.
C
Giles wrote:
>
> ------- Forwarded Message Follows -------
> From: "Tony Winkless" <xbw58@xxxxxxxxxxxxxx>
> To: <owner-olympus@xxxxxxxxxxxxxxx>
> Subject: OM1 - does it have a future?
> Date: Fri, 20 Oct 2000 20:57:15 +0100
>
> I have acquired an OM1 (for little outlay). The condition is ex+ or
> thereabouts. The meter appears to be doing its job. Mirror looks fine and
> locks up smoothly. Delayed action appears OK. Two problems, however. One,
> the winder, and drive sprocket, will not advance (the drive sprocket idles
> on 'R'). Two, the rear gasket is gooey.
>
> Is this an easy 'fix' or is it destined for an honourable retirement?
>
> Any thoughts please?
>
> Tony
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|