Thanks but the fogging is not outside the negative 36x24 frame - so must be
coming through the front?
Mike.
--- Hans van Veluwen <HVeluwen@xxxxxxxxxxx> wrote:
> :Using an OM40(PC), on some prints I'm getting a red cast,
> :always on the left
> :covering 10% to 200f the print. It is strongest on the left
> :and fades towards
> :the centre and is fairly even top to bottom. Might this be a
> :leak through the
> :shutter slit when cocked or during cocking (if my brain's
> :together, left on the
> :print would be the film take up end of the negative)? If so,
> :is there a cure?
>
> Check the foam in the camera back, on the camera where the back closes, and
> near the film cannister window (!) for rot. If it's rotten it must be
> replaced. This is not difficult. Replacement foam (light baffles) can be
> bought at:
>
> http://www.micro-tools.com/restore.htm
>
>
> hnz
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
=====
Mike Blayney, Devon, UK.
__________________________________________________
Do You Yahoo!?
Thousands of Stores. Millions of Products. All in one Place.
http://shopping.yahoo.com/
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|