Hi,
Although still off-list, I do want to share with you the results of my first
experiments with the Kodak SO-366 slide duplicating film; especially because
I found it hard to find practical information about this film on the
internet.
I have experimented with serveral ISO settings and different colour
compensation filters. General conclusion: the ISO setting is not very
critical (ISO 12-20 gives good results) and the "starting point
recommendations" for the filter pack are adequate. Personally I would use
ISO 20 and some more yellow, but maybe my compensation filters are a little
bit worn out and that's why I have to use some more yellow than recommended.
Take a look at the webpage for more information and some examples:
http://members.nbci.com/_XMCM/photovoogt/SO366/so366.html
Bye,
Erwin Voogt
Utrecht, The Netherlands.
PS Most of the time I will not be able to check the digests, so if you want
to react, please send a copy to my e-mail address too.
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|