Olympus-OM
[Top] [All Lists]

Re: [OM] M.15V Ni-Cd Charger

Subject: Re: [OM] M.15V Ni-Cd Charger
From: "C.H.Ling" <chling@xxxxxxxxxxxx>
Date: Wed, 24 Jan 2001 11:18:27 +0800
It is normal for the MD control pack charger to output around 30V, there is
current limit resistor inside. That is the current to charge the batteries
not the voltage, don't worry.

C.H.Ling

----- Original Message -----
From: "mnmitch" <mnmitch@xxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, January 24, 2001 12:57 PM
Subject: [OM] M.15V Ni-Cd Charger


> Help with charger needed!!! I have one of the NiCad chargers for the
> Control Pack 2 that is putting out 28 Volts DC. I thought this seemed a
> little excessive so I contacted John H. at Camtech and he said his put
> out about 13 Volts DC. I have just received one in the mail today from
> Thompson Photo and when I measured it's output it is 32 Volts DC. I'm
> not doubting John H., but at this point I can't believe that I've
> recieved 2 bad chargers in one week. If anyone else has one of the M.15V
> Ni-Cd chargers and can measure the output voltage on the connector,I'd
> appreciate it.
>   Something tells me that the charger must have better regulation than
> that, and the regulator is probably shot. If this one's bad, its going
> back to Thompson and I'll cut the cord off the original and find a
> transformer and make my own charger. Thats after I replace the bad
> Ni-Cads in the Control Pack 2 of course.
>
> Anybody opened up the Ni-Cad pack in the T-45 yet?
>
> TIA
>
> later,
> mike m.



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz