Olympus-OM
[Top] [All Lists]

Re: [OM] Disassembling OM2S(P)

Subject: Re: [OM] Disassembling OM2S(P)
From: Gregg Iverson <giverson@xxxxxxxxxxxxx>
Date: Fri, 26 Jan 2001 20:08:13 -0500
Been there, done that! Now grab a large magnet and sweep the floor with it. If that doesn't find it, actually sweep the floor and run the magnet through the dirt you sweep up. Don't have a magnet handy? In frustration grab the nearest stereo speaker. Good luck.

It's easier if you have young children. They have great eyesight and love to show up the parents.

Gregg

Ian wrote:


Earlier today I wrote:

 A few gentle strokes with a needle file and all
is well again, without the need for further dismemberment.  Well, almost
all - having carefully removed the lever so as not to lose the ball
bearings, and having filed off the offending burr, dorkowitz here picks
up the body to refit the advance lever, forgetting that they are still
there, held in only by gravity.

Doh!!! Still, it's easier to move into the "ready to go" position now
there's only one ball.


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz