Olympus-OM
[Top] [All Lists]

Re: [OM] Glossy poster

Subject: Re: [OM] Glossy poster
From: "John A. Lind" <jlind@xxxxxxxxxxx>
Date: Sun, 18 Feb 2001 11:35:11 +0000
At 15:11 2/18/01, Ron wrote:
A question from Ron in Los Angeles, California USA:


Do you have any suggestions on how to soften the flash reflection of
taking a photo of a glossy poster? I'm using an OM 4 and T32 flash.

Thanks, Ron

The method normally used for "flat art" is a copy stand that has diffused light coming from two directions on each side of the camera at 45 degrees to the artwork. Reflections from the surface of the art will not bounce back at the camera. If you cannot set something like this up indoors, try moving the artwork outdoor into open shade on the shady side of a building. Another method is to put it in a room with a large window with the shades and curtains open. You don't want direct sun, but indirect daylight through the window. Have the artwork facing the window for maximum light, but far enough so you can fit between the window and artwork. Watch for reflectance off of the dye layers in the poster . . . which shouldn't be a problem if the lighting angle is correct.

-- John


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz