Olympus-OM
[Top] [All Lists]

Re: [OM] Using Slave Flashes on OM Flashes

Subject: Re: [OM] Using Slave Flashes on OM Flashes
From: "Clint Spesert" <clint@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Tue, 13 Mar 2001 07:44:49 -0800
Another question along this line, If I have a F280, a T-32 and a T-20 all
hooked up via TTL cords, will an OM2, 2n, or 4T accurately measure the
exposure?  Is the camera able to shut all the flashes off to ensure proper
exposure, or do the flashes all need to be the same type, say 3 T-20s or 3
T-32s.

Clint
----- Original Message -----
From: "Frank van Lindert" <lindertv@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, March 13, 2001 6:47 AM
Subject: Re: [OM] Using Slave Flashes on OM Flashes


> Titoy,
>
> I used this kind of setup a long time ago, and I hope that my memory
> serves me well enough to answer your question. If not, I will
> certainly be corrected by other list members....
>
> The camera can only regulate the duration of the light coming from the
> flash connected by cable.
> But it will take into account all light reaching the film, including
> that of the remote flash, when calculating the flash duration of the
> main wired flash.
> If you make sure that the amount of light coming from the remote flash
> is small enough to avoid overexposure, everything will be fine.
> The camera will regulate the light of the cabled flash, needed in
> addition to the fixed contribution of the remote flash, to give a good
> exposure.
> BTW, the OM2N will warn you in case of overexposure in this set-up
> too.
>
> Frank van Lindert
> Utrecht NL.
>
>
>
> On Tue, 13 Mar 2001 22:13:55 +0800, "Clemente Colayco"
> <litefoot@xxxxxxxxxxxxxxx> wrote:
>
> >If I am to combine for example one T series flash (say a T 32) mounted on
> >the camera and another T series on a remote slave as fill in light source
> >(the type that fires by optical sensor), will the TTL function on an OM
2n
> >work properly. Will it be able to get proper exposure due to its TTL
> >function?
> >
> >IF not, what better way is there apart from using TTL cables (which are
> >expensive and not easy to use on T 20 due to hard to find adapter)?
> >
> >Regards
> >
> >Titoy
> >
> >
> >< This message was delivered via the Olympus Mailing List >
> >< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> >< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz