Olympus-OM
[Top] [All Lists]

Re: [OM] OK, I know I am inept, but.....

Subject: Re: [OM] OK, I know I am inept, but.....
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 11 Apr 2001 09:00:39 -0400
Tabs could be stainless steel which are harder to solder.

John  Hermanson
___________________________________
http://www.zuiko.com
Camtech, Olympus Service since 1977.
21 South Lane,  Huntington NY 11743-4714
Phone/fax 631-424-2121
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: "Gregg Iverson" <giverson@xxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, April 11, 2001 12:03 AM
Subject: Re: [OM] OK, I know I am inept, but.....


| Hi Tom,
|
| I learned a lot about soldering while sweating copper pipe for my dad and
| late while soldering slot car frames together, but I'm not sure exactly
| what problem you are having.  Is the tab not tinning, or is the wire not
| staying attached after it and the soldier cools down?  If you are having
| touble getting the tab to tin, try wiping a hot soldier drop with a dry
| cotton cloth.  that often works.
|
| If the wire comes off after the soldier cools, it wasn't soldiered at a
| high enough temperature.  The heat was drawn out of it too fast.  I used
to
| have that problem with heavy brass frames, until I started laying them
| across my grandmother's gas stove and reducing the heat slowly after
| soldering a joint.  You shouldn't have that problem!
|
| I wish you success.
|
| Gregg
|
| Tom wrote:
|
| >The tabs on the batteries will NOT solder.  No matter what.  No way. No
how.
| >
| >What am I doing wrong?  I'm clueless at this; haven't soldered in 25
years.
| >Wasn't much good then either.
| >
| >I'm hesitant to heat up the tabs too much, for fear of damaging the
| >batteries (which I might have already done).  I'm trying to solder
together
| >the batteries in the wierd 5/6/1 pattern that is required and the solder
| >joint keeps breaking...and breaking...and breaking.
|
|
| < This message was delivered via the Olympus Mailing List >
| < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
| < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|
|


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz