Olympus-OM
[Top] [All Lists]

RE: [OM] wanted: scanning lesson 101

Subject: RE: [OM] wanted: scanning lesson 101
From: "Wayne Harridge" <wayneharridge@xxxxxxxxxxxxxxx>
Date: Tue, 17 Apr 2001 20:29:37 +1000
Jez wrote:

> In the book "Photoshop for Photographers" concerning color
> balance there is an interesting suggestion that you photograph a
> grey card (ideally a Kodak 18 0rey reference) and then use the
> dropper tool to sample some pixels on the scanned image.  The R, G
> and B components should all have the SAME numerical value if
> there is no color cast - and presumably should equate to 18%.  So
> by tweaking levels on the color channels they can be equalized
> and then by tweaking brightness and contrast the image can
> presumably be 'calibrated' to the gray card.
> And then the rest of the photos on the same film should be correct.
>
> Anyone tried this?
>

Sort of !

I wouldn't use only an 18 0ray card, try something like a Kodak Gray scale
("Kodak Color Separation Guide and Gray Scale (Small) Q13 CAT 152 7654 - 20
steps from "white" to "black").  When photographing these backet your
exposures and check the negatives/transparancies to ensure that you can
separate the 20 steps.  Scan the best negatives/transparencies and see if
you can resolve the 20 steps on the scan.  Check the colour balance at
several points on the gray scale - I know my scanner doesn't have the same
colour balance over the full density range, possibly the film doesn't either
!  Basically, a single gay card image will only give you 1 reference point -
you will not be able to "calibrate" from this 1 point.

Wayne Harridge
Ivanhoe, Victoria, Australia
http://members.optusnet.com.au/~w_harridge/




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz