The only way to hook multiple flashes to an OM2(n) is to use an TTL
Auto-connector Type 4 and a TTL Multi-Connector. You connect all the goodies
via TTL Auto cords. The T-20 needs the hard-to-come-buy T20 Auto Connector
Here's the wiring scheme (-> means connects-to)
OM2n ->
TTL Auto Connector Type 4 (mounts on the hot shoe screw) ->
TTL cord #1 (use whatever length you want) ->
TTL Multi Connector (one input, three outputs) ->
TTL Cord #2 and #3 (again, your choice of lengths) ->
Flashes (T-20 requires T20 Autoconnector, T-32 has direct plug-in)
The eSIF has the details and manuals. Look for the Flash Group Manual.
Skip
Original Message:
-----------------
From: Trevor and Gail Urlwin urlwintg@xxxxxxxxxxxxxx
Date: Mon, 23 Apr 2001 23:05:37 +0800
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] Auto Connectors
It is most opportune that this thread has come along just now. I have been
trying to work out what I will need to do the job that Tony asks about
using my OM2n, a 50/3.5 macro and T20.
I have been looking at the eSIF information but haven't been able to make
up my mind what is needed.
I want to use the OTF of my OM2n and move the flash around. I would also
like to use at least one other flash and may buy a T32 for that.
Can someone give me some guidance.
Trevor
Trevor Urlwin
2F, 22 Ha Wong Yi Au Village
Tai Po, New Territories
HONG KONG
--------------------------------------------------------------------
Mail2Web - Check your email from the web at
http://www.mail2web.com/ .
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|