Olympus-OM
[Top] [All Lists]

Re: [OM] ***Sand in my lens***

Subject: Re: [OM] ***Sand in my lens***
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 2 May 2001 08:44:00 -0400
No spray cleaners!  Then the story becomes "..there's sand in my lens and
liquid damage..."
The helicoid has to be taken apart (and it can screw together from, maybe, 6
different "starting" points) sand cleaned out, then rebuilt.  Once the keys
are taken out, it will probably unscrew, even though sand is there.
The trick with the helicoid is that once you screw it down, the slots levers
and screw holes have to end up at a certain place, to align with the screw
holes on the other part.

John  Hermanson
___________________________________
http://www.zuiko.com
Camtech, Olympus Service since 1977.
21 South Lane,  Huntington NY 11743-4714
Phone/fax 631-424-2121
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: <Ez2endo@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, May 01, 2001 5:30 PM
Subject: [OM] ***Sand in my lens***


| Hi Guys,
|      The subject says it all. I droped my case in the sand one day and
| apparently didn't get it all out, because now The focusing ring on my
Olympus
| 50mm lens won't turn at all.  Is this something I could clean my self? How
| about a spray type of cleaner that leaves no residue, think this will
work?
| Thanks for your suggestions!
|
| Chet \\\0tO
| 97 XR250-GPS equipped
| 94 JT25
|


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz