Anyone know the email of PaulVt?
Regards
Titoy
----- Original Message -----
From: johnsonpa <johnsonpa@xxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, August 14, 2001 11:10 AM
Subject: Re: [OM] OM camera repairs bayonet mount, other things.
> >1. I am wondering if I need to replace the bayonet mount ring on the
camera
> >soon, and if it is an easy or DIY job.
> Make sure the three screws on the bayonet mount are snug...don't break
them!
>
> >2. Can you still get a new/replacement top-plate for a black OM-1N?
> Call Oly America at 1-800-622-6372 and go through the menus until you get
to
> the Parts Department. Try to find the part number first, though.
> Also contact eBay seller paulvt. He was selling some top covers to
various
> bodies not too long ago. He might have one.
>
> >3. How does so much muck get behind the viewfinder eyelens of my OM-4Ti?
> Not my department...but I'd like to know too!
>
> >4. 16mm/3.5 fisheye lens and in general: this lens has a loose rubber
> >focussing sleeve. I have heard of this before.
> >How best to stick it back on?
> I would use Pliobond or Hobscoe's Goo, i.e. contact cement...but I'm not
> sure if this is the preferred technique
>
> HTH,
> --p.j.
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|