Olympus-OM
[Top] [All Lists]

Re: [OM] OM-40 (OM-PC) "B" setting not working properly

Subject: Re: [OM] OM-40 (OM-PC) "B" setting not working properly
From: "Keith Berry" <k.berry@xxxxxxxxxxxxx>
Date: Sat, 25 Aug 2001 01:13:58 +0100
Wim Verheyen wrote:
>
> When I set the shutter time ring on my OM-40 to "B", it doesn't work as
> expected.
> I push the shutter release button, and keep it pushed, the shutter opens,
> but after about 1 second, the shutter closes again.
> When I set the timing to 1 second, I have the impression that the opening
time
> is only about half a second....

It sounds as though the shutter ring is one 'stop' out of sync with the
actual speeds. Can you turn it past 'B'? What happens at the 1/1000 end?

Regards,
Keith Berry
Birmingham, England


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz