Bill,
Thanks for the idea of putting those little plugs in a film case.
Tina
------------------------------
Date: Wed, 05 Sep 2001 08:42:31 -0700
From: Bill Stanke <bstanke@xxxxxxxxxxxx>
Subject: Re: [OM] T32 Accessories for Off Camera Use
Tina:
You don't need a TTL Autoconnect 3. The purpose of this gizmo is to
provide an OM-2 (ONLY) with a TTL socket on the "camera side". A TTL
Autoconnect 4 will do the same thing for an OM-1n or OM-2n. They replace
the removable hot shoe on the OM-[1-2]. Your OM-2SP has this connector
built-in. Looking at the camera from the front, it is the socket on
your right. It may have a plastic plug if it has never been used. I
try to keep these in a 35 mm film case, as you will instantly lose these
rascals!
The TTL Autocord Type T comes in .3, 6., 2 and 5 meter lengths. The .6
meter is probably the most convenient to use, as it is a coiled cord.
Bill Stanke
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|