Order part #CB080400 from Olympus/Parts. It's still available (we use it to
fix a light leak on the Stylus Zoom).
The hood just unscrews -- hold the knurled part at the back of the hood, and
unscrew the hood from it. The felt goes inside the knurled ring, though, I
believe -- to get it off, you'll have to remove the brass stop screw(s) in
front of it.
Mike wrote:
> Any way to tighten the integral hood on a lens? Specifically the 85-250.
> There is no friction so it just flops. otherwise the lens works fine. Is
> there a way to remove the hood and restore the felt or whatever gives
> enough friction to work properly?
>
> Thanks, Mike
>
> --
> Latitude 48° 32' North, Longitude 123° 7' West
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|