Henrik,
If you get a control pack from enormousbay expect that you may have to do
this:
http://petroglyph.crestline.ca.us/Olympus/controlpack1.htm
Although list-member pj, before leaving on 'sabbatical' to the south
Pacific--OMs in hand--found this place:
http://www.maxxprod.com/mpi-7.htm
that made up a proper pack (let me know if you need a copy of the full
message about it) for him. Or just use a Control Grip (1 or 2).
---
Scott Gomez
-----Original Message-----
From: Henrik Dahl [mailto:hdahl@xxxxxxxxxxxxxxxx]
Sent: Tuesday, September 18, 2001 14:46
To: olympus@xxxxxxxxxxxxxxx
Subject: [OM] Re: MD1/Control Pack 2
Thanks. Just have to get hold of a control pack and a charger then. eB*y
maybe?
Henrik Dahl
>As I have two MD1's and a Control Pack one and two, I can assure you the
>Control Pack 2 works fine with either and early or later MD1. As a matter
of
>fact, It was years before I knew they were different models. Since I got
the
>later, small button MD1 and the Control Pack 2 at the same time, the
Control
>Pack 2 must have pre-dated the MD2. I'm fairly certain I would not have
>purchased the MD1 had the 2 been available.
>
>The only difference I can see is the storage place for the cap on the
>Control Pack 2. If you buy a motor and Control Pack 2 at the same time, you
>may already be a winner. I suspect the top plate on the 1 and 2 would be
>interchagable. The charger for my Control Pack 1 works fine with the
Control
>Pack 2, I imagine they use the same cables.
>
>I feel a bit like Tom with his OM2/T32 situation.
>
>Bill Pearce
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|