The following parts can easily be lost while taking off the top cover of a
4T: rewind button and spring, the tiny brass click and spring under the asa
dial, 2 ball bearings under wind lever, washer under wind lever, 4 tiny
screws holding top on, rewind lever pin, nut holding asa plates on, nut
holding wind plates down,............................
_________________________________
John Hermanson
Camtech, Olympus Service since 1977
631-424-2121 www.zuiko.com
Call Olympus for FREE manuals!
1-800-221-3000
_________________________________
----- Original Message -----
From: "Henry Bottjer-BA" <hcbottj@xxxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, December 03, 2001 11:53 PM
Subject: RE: [OM] OM-4t Circuit?
> Thanks! Unfortunately I've not removed the top cover on the 4t and lack a
> repair manual. Any "tricks" I should look out for (like the door spring
> flying) in removing the cover?
>
> -----Original Message-----
> From: owner-olympus@xxxxxxxxxxxxxxx
> [mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of John Hermanson
> Sent: Monday, December 03, 2001 11:11 PM
> To: olympus@xxxxxxxxxxxxxxx
> Subject: Re: [OM] OM-4t Circuit?
>
>
> There are pressure sensitive rubber conducting pads inside the top cover
> between the top circuit and the buttons on the outside of the top.
Cleaning
> those would solve some or all of your problems.
> _________________________________
> John Hermanson
> Camtech, Olympus Service since 1977
> 631-424-2121 www.zuiko.com
> Call Olympus for FREE manuals!
> 1-800-221-3000
> _________________________________
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|